歡迎您訪問青島億金來鋼膜結構安裝修繕工程有限公司 網站!

青島億金來鋼膜結構

承接各停放,景觀 體育看臺等膜結構棚

青島億金來鋼膜結構安裝修繕工程有限公司
統一咨詢電話:15694496888
當前位置:首頁>新聞中心-公司新聞-膜結構車棚的制作技術要注意什么?
膜結構車棚的制作技術要注意什么?
來源:http://www.baokangjixie88.com/ 發布時間:2021-11-02
一、膜結構加工操作人員需要有經專業培訓的上崗證,上崗證應明確其崗位及技能要求。
1、 Membrane structure processing operators shall have professional training certificates, which shall specify their post and skill requirements.
二、制作膜結構車棚所使用的測試設備、工具、量具應按國家有關規定,經計量鑒定合格,量具應一次標定。
2、 The test equipment, tools and measuring tools used to make the membrane structure shed shall be qualified after measurement and identification according to relevant national regulations, and the measuring tools shall be calibrated at one time.
三、膜結構制作應具備專業工藝流程線、必要的裁剪、熱合設備及測試設備。同時應具備經鑒定或專業評定的膜結構裁剪設計軟件。
3、 The fabrication of membrane structure shall have professional process flow line, necessary cutting, heat sealing equipment and testing equipment. At the same time, it shall have membrane structure cutting design software that has been identified or professionally evaluated.
膜結構停車棚
四、膜結構制作應在專業化工廠進行,應具備潔凈、干燥、避免陽光直射的環境條件,應具備膜的制作專用設備和專用車間,室內工作溫度保持在5-30℃范圍內,應避免熱源對膜材的熱輻射影響。
4、 The fabrication of membrane structure shall be carried out in a professional chemical plant, which shall have clean, dry and direct sunlight free environmental conditions, special equipment and special workshop for membrane fabrication. The indoor working temperature shall be kept within the range of 5-30 ℃, and the influence of heat source on the thermal radiation of membrane materials shall be avoided.
五、膜結構的制作分為膜的裁剪、連接、配件的制作加工、包裝、運輸。制作應符合以下工藝流程:膜材驗收,技術參數的確定,膜的裁剪,裁剪膜片的幾何尺寸的檢驗,膜片的連接,連接強度的檢驗,膜體的幾何外形的檢驗,連接件定位固定,膜體的清理,膜體的包裝,標記。
5、 The production of membrane structure is divided into membrane cutting, connection, production, processing, packaging and transportation of accessories. The production shall comply with the following process flow: acceptance of membrane materials, determination of technical parameters, cutting of membrane, inspection of geometric dimensions of cutting membrane, connection of membrane, inspection of connection strength, inspection of geometric shape of membrane body, positioning and fixing of connectors, cleaning of membrane body, packaging and marking of membrane body.
六、膜結構車棚的制作應編制工藝設計文件,內容應包括:膜材檢驗,設備及量具檢驗,裁剪膜片的確定,裁剪方法,張拉伸長量的預調整,制作質量標準、工序兼驗收方法,包裝及運輸。
6、 Process design documents shall be prepared for the fabrication of membrane structure shed, which shall include: membrane material inspection, equipment and measuring tool inspection, determination of cutting diaphragm, cutting method, pre adjustment of tensioning elongation, fabrication quality standard, process and acceptance method, packaging and transportation.
圖標分類中心

Product

聯系我們
青島億金來鋼膜結構安裝修繕工程有限公司 青島億金來鋼膜結構安裝修繕工程有限公司

聯系電話:15694496888

聯系地址:山東省青島市城陽區前海西社區居委會西100米

三级网址_哪里可以看av_乱人伦视频中文字幕